Fundamentals Reloaded | Holosun EPS Carry Reset

Wiki Article

The Holosun EPS Carry is a well-regarded choice for concealed carry enthusiasts. But even with its intuitive design, sometimes you need a solid reminder on the basics. This article dives into the essentials of resetting your Holosun EPS Carry, ensuring you're always good to go. We'll cover everything from getting acquainted with the reset mechanism to troubleshooting common issues. Let's get back to basics and make sure your Holosun EPS Carry is firing on all cylinders

By grasping these fundamentals, you can ensure your Holosun EPS Carry is always ready when you need it most.

Powering Down and Up Your Holosun EPS Carry Red Dot

Your Holosun EPS Carry red dot sight is a robust piece of kit, but even the best gear can sometimes need a little TLC. If your EPS Carry seems to be malfunctioning, a simple reboot might just do the trick.

First, locate the activation switch on the side of your red dot sight. It's usually a small, tactile switch. Press and hold this switch for about 5 seconds until you see the red dot blink. This indicates that your Holosun EPS Carry is now off and ready to be rebooted.

When the sight has powered down, release the switch and wait for a couple of seconds. Then, press the activation switch again to power on your red dot. The red dot should now be visible as normal.

If this simple reboot doesn't resolve your issue, you might want to consult the user manual or contact Holosun customer support for further assistance.

Restore Factory Settings for the Holosun EPS Carry

Performing a factory reset on your Holosun EPS Carry can be useful if you're experiencing issues with the sight or simply want to return it to its original configuration. This process will erase all user-defined settings and restore the sight to its factory defaults.

To begin, locate the small reset button on the side of your EPS Carry. Use a thin implement like a paperclip or the tip of a pen to activate this button. Hold it down for about five seconds until you see the screen flash. Release the button and your Holosun EPS Carry will now be reset to factory settings.

Return to Factory Settings on Holosun EPS Carry

Need restore your Holosun EPS Carry to its original configuration? Follow these simple steps.

First, locate the small reset button on the bottom of your Holosun.

Using a pen tip, gently press and maintain the button for approximately 3 seconds. You should see the display flicker, indicating that the reinitialization process is successful. Release the button and your Holosun EPS Carry will now be reset to original values.

Adjusting the Holosun EPS Carry Red Dot to Default

Occasionally, you could need to restore your Holosun EPS Carry Red Dot to its factory settings. This method is simple and can be completed in a few steps. First, make sure the red dot is powered off. Next, locate the minute lever on the side of the optic.

Press this button for around five units. You should see a alternating light on the display, which suggests that the adjustment is successful. Release the button and your Holosun EPS Carry Red Dot will now be at its factory reset Holosun EPS Carry red dot default settings.

Unlocking Default Settings: Holosun EPS Carry Guide

Navigating the world of red dot sights can be a challenging task, especially when you're introduced into the versatile Holosun EPS Carry. This compact and durable optic is built to perform in a carry situation, but unlocking its full potential involves understanding its default settings. This guide will reveal the key adjustments you can make to optimize your EPS Carry for a effortless carry experience.

Report this wiki page